Immmes Water Treatment
DTP SYSTEM – LIMPID WATER GLASS
The DTP SYSTEM is an innovative and hi-tech treatment system which exclude all chemical flocculation process and allow a big saving of water working in “closed cycle”. It’s a centralised treatment system ideal for medium-big companies which could provide limpid water in real time to working machines.
Models – Flow
DTP 20 – 20 mc/h
DTP 50 – 50 mc/h
DTP 70 – 70 mc/h
DTP 100 – 100 mc/h
DTP 150 – 150 mc/h
ID SYSTEM – CLEAN WATER GLASS
The ID SYSTEM is the right balance between efficiency and restrained costs, it combines high capacity of treatment with a simple plant. Pre-mounted on skid, easily installable and provide clean water to working machines. Ideal system for companies that want to start a centralized water treatment system with the possibility in a second time to increase in a DTP system.
Models – Flow
ID 20 – 20 mc/h
ID 40 – 40 mc/h
ID 50 – 50 mc/h
DGS – SLUDGE EXTRACTION
The DGS is a totally automatic system for dehydrate, compact and store the sludge from glass processing, could be applied also in one or two machines or on existing and working systems. The DGS find application on DTP and ID systems.
IM 630 – Modular Plates
ANTEAONE – FOR PRINTING SECTOR
ANTEAONE is a system with contained dimensions pre-mounted on skid, easy to be installed which provide the separation of water from residual paints coming from printing frames washing, the clean water will is reused in new washing process.
ANTEAONE – 1 to 4 mc cycle/day (flow)
OSM & DEM SYSTEMS – FOR DEMINERALISATION
OSM & DEM are systems dedicated to the demineralisation of the water which imply, through chemical physical process, the total or partial elimination of dissolved salts. The two systems which answer to this need are: OSM reverse osmosis that is inspired from physical process of osmosis and DEM resins cationic and anionic. Both are ideals for application on washing systems.
Models – Type
OSM 100 – 100lt/h
OSM 200 – 200lt/h
OSM 300 – 300lt/h
Models – Type
DEM A35 – Automatic
DEM M1 – Manual
Zafferani Centrifugal Drum Systems
The Centrifugal sludge-water separator has been designed to physically removal the glass fines from process water waste, this in turn helping the environment costs to the company and helps improve the life of the machines.
Suitable for direct connection to Edger’s, Bevellers and CNC machines.
- THE SYSTEM DOES NOT USE CHEMICAL AGENTS
- PROLONGS PERIODIC CLEANING OF THE MACHINE WATER TANKS .
- HELPS TO AVOID BLOCKING OF WATER PIPES, TUBES AND BRUSHES
- INCREASE THE LIFE OF THE MACHINES AND REDUCES THE NEED FOR MAINTENANCE DUE TO GLASS FINES
- INCREASE THE LIFE OF DIAMOND AND POLISHING WHEELS
- OBTAINS BETTER POLISHING RESULTS
The Machine operation:
Processed water is pumped to the rotating drum inside the separator by a dedicated submersible pump included with the system, the glass fines suspended in the fluid are “pushed” against the aluminium drum walls by the effect of the centrifugal force, letting the purified water flow back out of the system and returning to the machines water tank.
After some time, depending on the volumes processed, the operator stops the separator to take out the glass sludge inside of the aluminium drum. Once opened the separator is protected by a sensor opening system that allows opening only after a few minutes so that the drum has ample time to stop.
Dimensions: 500 x 970 x H = 900 mm.
Weight: 150 Kg.
Power: 2 Kw
Max Flow rate: 100 lt/min
Rotor volume: 16 lt
Sludge MAX capacity: 8 Kg
Removed Glass Sludge per hour : 6 Kg/hour (the equivalent to around 5 hours of edging 6 mm glass with one mm glass removal)
Particle MAX acceleration:1250 g
Particle min size: 5 micro